SimXPro HEAVY Triple Screen Stand: VESA, Build Order and Bezel Alignment Guide
Quick summary· AI-generated
The guide walks through five pre-purchase compatibility checks (VESA pattern, display dimensions, weight limits, cockpit clearance, and cable routing), an efficient build order, precise bezel-alignment techniques to make three separate panels feel like one continuous windscreen, and provides side-by-side guidance on when the SimXPro HEAVY or Sim-Lab VARIO freestanding stand is the better choice based on rig layout and display size. Real customer installations and measurements are used throughout to ground practical advice.
Excerpt from Sim Race Webshop B.V. - Product Higlights
A triple-screen stand determines whether your displays feel like one continuous windscreen or three separate panels. The SimXPro HEAVY Triple Screen Setup is a freestanding aluminium-profile stand aimed at large displays and precise positioning around a sim racing cockpit. This guide covers the measurements to make before purchase, an efficient build order, bezel alignment and when the Sim-Lab Freestanding VARIO may be a better fit. Both stand families were active and in stock at Sim Race Webshop on 2 October 2026; check the live product pages for current variants.
A real SimXPro triple-screen installation shows why screen height, side angle and cockpit clearance matter. Customer setup shared via SimXPro / Pinterest. Why a freestanding triple monitor stand?
A freestanding stand sits on the floor rather than bolting to the cockpit uprights. That means force-feedback vibration, load-cell braking and seat movement are less likely to shake the displays directly. It also gives you freedom to bring the centre screen toward the wheelbase without shifting the seat or pedal position. The trade-off is floor space: measure the full footprint, access path and screen swing before moving a rigid stand into place.
SimXPro builds the HEAVY version from 40 × 80 mm aluminium profiles with adjustable VESA mounts. The store sells a STD 75–100 VESA variant and a 100–200 VESA variant. Check the screw-hole pattern on each monitor rather than choosing by screen diagonal. VESA 100 × 100 means 100 mm between the mounting holes in both directions; it does not tell you the screen's overall width or mass.
The HEAVY stand is independent of the racing cockpit. Image: Sim Race Webshop / SimXPro. Before ordering: a five-point compatibility check
1. VESA pattern and bolt depth
Read the monitor manual or measure the rear holes. Confirm the selected SimXPro variant supports the pattern on all three screens. If a monitor has a recessed VESA socket, check whether spacers and longer bolts are required; use the screen maker's specified screw length so a bolt cannot bottom out against internal components. If your three screens use different VESA patterns, make that explicit before ordering.
2. Display dimensions, not only diagonal size
SimXPro's current product information describes use with large displays, but its page is inconsistent about which 43-inch aspect ratio is supported. A 43-inch 16:9 screen and a 43-inch ultrawide have very different width, height and weight. Compare your…
Comments (0)
No comments yet.